It's been a long time but the ball is finally rolling and it can't be stopped. I'm super excited and can't wait to get this beast up and running.
Posted 01 February 2015 - 07:24 AM
I just finished mine from Christmas... wife gave me a blank check Purchased most of my stuff from Bravo Company, the upper is fantastic. Wish I had this ITS lower though. Can't wait to see yours my man.
Posted 01 February 2015 - 10:51 AM
Sweet, I'm going to start working on my 308 AR as soon as tax money comes in.
As Seen on: M4Carbine.net, GlockTalk, and NCGO.
Posted 01 February 2015 - 01:02 PM
So jealous of the ITS lower, helps to know a guy =)
Good luck on the build, have fun.
"Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote." Benjamin Franklin
Posted 01 February 2015 - 01:49 PM
So jealous of the ITS lower, helps to know a guy =)
Good luck on the build, have fun.
I bought that lower when they were first announced, I've just had it hidden away in a desk drawer for so freaking long! Yeah way too long to be exact but I'm thrilled it's finally coming together.
Posted 01 February 2015 - 02:02 PM
As Seen on: M4Carbine.net, GlockTalk, and NCGO.
Posted 01 February 2015 - 03:26 PM
Is there going to be another run of them?
I haven't heard any rumors of another run but it's certainly something to consider.
Posted 01 February 2015 - 04:58 PM
I know I'd like to have an ITS lower, then it'll give me an excuse to the wife for the complete build
A government feared by its citizens is tyranny. A government afraid of it's citizens is freedom
III%er
Posted 01 February 2015 - 08:39 PM
Posted 02 February 2015 - 04:09 PM
If they decide not to do another run you could likely find a local engraver willing to do one up for you.
Posted 03 February 2015 - 11:13 AM
If they decide not to do another run you could likely find a local engraver willing to do one up for you.
Would take the novelty out of an ITS sponsored lower run though.
Posted 03 February 2015 - 05:03 PM
Looking good there mike!
Posted 03 February 2015 - 07:03 PM
Posted 03 February 2015 - 09:32 PM
Very high speed trigger, Mike! You must be a real operator to run an invisible trigger like that
Posted 04 February 2015 - 02:00 AM
Very high speed trigger, Mike! You must be a real operator to run an invisible trigger like that
As Seen on: M4Carbine.net, GlockTalk, and NCGO.
Posted 04 February 2015 - 09:49 AM
Mind bullets, sir. Mind bullets.
Glad you guys like my new trigger. With that specific trigger, I have the power to kill a yak from 200 yards away.
In all reality, laying the Stag Arms lower parts ziploc bag of losable pieces didn't look as sexy as the other parts all laid out.
This is a pretty simple budget build. I didn't go with super bare bones parts but kept it lower middle class for the most part. Maybe technically middle class because I could have gotten a cheaper stock and compensator but I thought I'd try something new.
I have some lessons learned already from this build but I'll share those a little later.
Posted 04 February 2015 - 10:02 PM
Here she is 98% complete in look and 100% ready to fire.
Scuttlebutt →
General Discussion →
Inside the Federal Bureau Of Way Too Many GunsStarted by Koopa , 31 Aug 2016 ![]() |
|
![]()
|
||
Resources →
ITS In-Depth →
MAS Grey cerakoteStarted by Psybain , 29 Jul 2016 ![]() |
|
![]()
|
||
Gear Locker →
2nd Line Gear →
Light-weight ARStarted by alexrgaskins , 22 Jul 2016 ![]() |
|
![]()
|
||
Armory →
Primary →
Rifle suppressorStarted by Psybain , 10 Jun 2016 ![]() |
|
![]()
|
||
Armory →
Primary →
Red Dot Input RequestedStarted by mikejulietpapa , 02 Nov 2015 ![]() |
|
![]()
|
0 members, 0 guests, 0 anonymous users