86 replies to this topic

[CENTCOMSurvivor]

jinx667 said:

Mine, done with Aervoe.  

---

 Am I the only one who cant see these photos (thumbnails)?

[mikejulietpapa]

I see them fine, both the thumbnails and the full size images. (it's a pretty sweet rifle too, you're really missing out!)

[jinx667]

Yeah I even see them in your quote? Strange.

[PsychoFish]

BAND-AID said:

Ken Bass II said:  Rem 700 .300wm

---

Curious how you did this. I know they make stickers to put on and help you layer to pull of the digital, but it doesn't look like that. Anymore info?

---

Sorry it took so long to actually respond to this.  '/wp-content/forum-smileys/anim_stick.gif What I did was got some duct tape and made a frame of sorts a pretty good size. Then I used fiber glass tape to fill in the frame. More duct tape secured everything into place. Then I cut some random square shapes (long, short, etc. Think about playing tetris!) and stuck them onto the fiber glass making sure that the square edges lined up with the sqaures on the fiber glass tape. I didn't want sharp edges like many of the other "digital" camo so thats why I tried using the fiber glass which would put lines into the pattern and allow the color under it to show through, although only a little. I then made sure to "dust" the pattern so it wouldn't be too harsh.  A couple years later and it's showing some wear, but since the photo above I added the projects name to the side.

Edited by Ken Bass II, 29 January 2011 - 05:01 PM.

[jinx667]

I like that idea of faded digital.  Kind of best of both worlds.

[Liles]

This is more of a before / after... below is my original build that was intended for varmint hunting before moving to TX. /wp-content/forum-image-uploads/liles/r_side_ar.pngAfter a couple hunting outings here in TX humping through thick brush, the added weight of the 20" bull barrel made its presence known so I opted to change it up to be more accommodating to the terrain I hunt.../wp-content/forum-image-uploads/liles/mod_ar.jpg

Edited by Liles, 22 September 2011 - 12:57 PM.

[c. Gfield]

Anyone try the combo of a base coat of Cerakote with rattle can over since its supposedly very easy to take the paint off and change up your pattern or color due to change in season/ AO?? Im thinking of doing this on my current AR build. 

[Liles]

I acquired a Remington 700 SPS that apparently someone attempted to apply a sudo-desert paint job... yellow with burgundy accents. I was able to remove the paint fairly easily with standard paint thinner and bore cleaner and a stiff nylon gun cleaning brush.

[SWATRET]

This is one of my 6.8's.  RRA recievers.  White Oak Barrel." alt="" />

[phillipm]

It's not completely done and it's dipped not painted but I wanted to share. " alt="" />

Edited by Phillip, 14 November 2011 - 06:52 PM.

[Klarktx]

This is one of my 6.8's.  RRA recievers.  White Oak Barrel.<img src="" alt="" />Swat, I really like the looks of this 6.8. I have the same hardware on mine. Thanks for sharing

[langston302]

my Spikes M4LE and my Colt M16A1. The Spikes is a true frankenrifle, the Colt is as stock as it was when it left the factory in 1968 minus the ability to go full happy.

[Ephraim Rogers]

I'm a fan of simple paint and breaking up the signature.

Aerove wig a fishing net for the most part.

[Lao]

great lookins shooters i just cant bring myself to paint mine

I'm with you bro.

[killswitch310]

Edited by killswitch310, 23 May 2013 - 01:48 PM.

[Oregon Jim]

Chicks dig them!

[CENTCOMSurvivor]

^^ Dinner? Rifles look good!

[tremis]

I literally just posted in the AR picture thread a moment before I realized my MK18 should have been in THIS thread. Oops.

[nito]

Im not a photo savy guy. can you tell witch one gets used more.

Edited by nito, 20 August 2013 - 10:15 AM.

[Skinz0021]

Not the only one, but the better looking of them. The rest were solid colors.



Well guess this could count too since its two-tone