ITS Tactical

Knot of the Week HD: Creating Your Own Ladder with Tubular Webbing

Knot of the Week Etrier Ladder

Continuing where we left off with our Knot of the Week series last week, today we’ll finish what we started with the Frost Knot and complete the Etrier. In climbing, an Etrier (French for stirrup) is also referred to as an aider, or a climbing ladder that’s commercially available.

Hopefully after you watch today’s KOTW video, you’ll start to rely on your skills to create a ladder, instead of having to carry around a purchased one when climbing. While hard to pronounce, the Etrier is easy to tie and a very effective way to create a field expedient ladder with nothing more than a 20 ft. section of tubular webbing.

Etrier » Loops

(Strength: 5/Security: 5/Stability: 5/Difficulty: 1) See below for what these ratings mean.

What you’ll need to tie you own Etrier is simply a 20 ft. length of 1″ tubular webbing, which you can get from most outdoor shops like REI or online from Amazon. Go with a name brand like Bluewater Ropes if you’re buying this online. Just like with paracord, there’s well made and there’s junk; caveat emptor. You’ll actually need paracord as well for whipping each rung of your Etrier for added support.

It’s mentioned in the video above, but you’ll want your “steps” to be about 12″ in height when tied and about 8″ in width. Be careful when whipping the steps with paracord, as it has a tendency to twist the step during the wrapping.

The purpose of this KOTW isn’t to replace a commercial Etrier for climbing, but to show the utility and ease of creating a ladder out of seemingly nothing. While the original intent of an Etrier is to assist in big wall climbing, it really doesn’t have to be used for rock climbing at all, hence the reason I’m referring to it as field expedient ladder. In rock climbing you wouldn’t want a long ladder, but in an emergency situation you might.

It’s actually easy to join two Etriers together if you need more height as well. Just simply use the other variation of the Frost Knot on the looped end you’re left with after tying it. It’s also described in the video above, just in case you didn’t remember from last week’s knot.

Ratings

Strength/Security/Stability/Difficulty

Each knot will be assigned a rating from 1-5 (1 representing the lowest score) based on the following four properties:

Strength – All knots will weaken the strength of  a rope, however, there are knots that are stronger than others. The scale here will reflect how strong the rope remains with the specified knot.

Security – The security scale refers to how well the knot will stay tied, and resist coming loose under a normal load.

Stability – Stability refers to how easily the knot will come untied under an abnormal load (i.e. the knot being pulled in a direction it was not intended to) A lower score here represents instability.

Difficulty – The lower the number, the easier a knot is to tie.

Exit mobile version