Learn How to Ascend: Part 1, Equipment - ITS Tactical
Shop the ITS Store!
 

Learn How to Ascend: Part 1, Equipment

By The ITS Crew

Learn How to Ascend 01Now that we’ve covered getting down a rock face in our “How to Rappel” series, we’ll look at how to use ascenders to get back up the rope.

Situations that would involve having to ascend back up a rope you’ve just rappelled down, would most likely be in caving, or spelunking, depending on your training level.

Ascenders function much like friction knots, or prusiks, by providing a grip on the rope. With a mechanical ascender, the grip is set with a cam, allowing it to only move in the intended direction of travel (up).

Using mechanical ascenders makes the chore of prusiking faster, safer and more secure. There’s nothing wrong with using prusiks to ascend a rope in a pinch, but if you can afford to carry ascenders, you’ll wonder how you lived without them.

There’s much more to ascending than simply owning ascenders, and in this part of our series, we’ll look at the equipment required to properly and safely ascend.

Ascenders (Mechanical)

Learn How to Ascend 02We’ve used Petzl Ascension Ascenders for a long time, and recently tried out Black Diamond nForce Ascenders and fell in love! While there’s nothing wrong with the Petzl Ascenders, the Black Diamond nForce Ascenders offer some great improvements.

For starters the nForce  uses a unique four-bar pivot system that places your entire body weight on the cam for excellent grip, even on muddy and icy ropes.

The teeth on the nForce cam are straight as opposed to the angled teeth on the Petzl’s, which we feel  decreases rope wear due to the cam levering pressure to the teeth like a clamp.

Another huge benefit of the nForce Ascenders are the 360 carabiner attachment points which allow you to rotate a large locking gate carabiner completely through.

Metolius Easy Daisies and Easy Aiders

Learn How to Ascend 03Now that we’ve covered ascenders, we need a way to attach them to our harness and to our feet.

We’re huge fans of the Metolius Easy Daisy and Easy Aider, and just like mechanical ascenders, they make ascending faster, safer and more secure.

Easy Daisies are used as the attachment points from your climbing harness to the ascenders. They girth hitch into the harness loop, and attach to the ascenders with carabiners.

The daisies allow you to sit back in your harness and act as backup in case one of your ascenders becomes detached.

What makes the Easy Daisies great is that they’re adjustable on the fly, as opposed to a regular fixed-length sling being used.

A pair (right and left) of Easy Aiders are used to connect the ascenders to your feet. They have an adjustable buckle on each foot strap ensuring your foot never comes out.

While using two Easy Aiders is not necessary in ascending, it will help make your ascent faster and more efficient by allowing full use of both your legs. This is especially great for ascending long pitches where using one leg can be tiring.

Like the Easy Daisies, the Easy Aiders are adjustable on the fly allowing you to find the optimal length needed.

Climbing Harness

Learn How to Rappel 03Without getting into different types of climbing harnesses, make sure you’re using a harness that fits and is comfortable. You’ll want at least a few inches left over at each buckle or clip in point to double back and tie off any slack with an overhand knot.

It’s also important that the harness is built well and has a belay loop that features double thickness webbing that has multiple bar tacks. The harness we’re using is a  Yates Tactical Rappel Belt with cobra buckles on the leg straps which makes taking the harness on and off very easy.

Carabiners

Learn How to Ascend 04What’s great about our ascending setup is that it only requires four locking carabiners. This includes clipping a carabiner into the top of each ascender to help keep the run of the rope straight.

Only carabiners with locking gates should be used in this setup, and we highly recommend manually locking gates for this application.

On manually locking carabiners remember to screw the locking mechanism down, so you don’t screw up!

Essentially what that means is that you want your locking gate to be carried into the locked position with gravity. If it becomes loose, it’s better to not have gravity trying to loosen it further.

When we put together this demonstration we used non-locking carabiners for the top lock-in of each ascender and while ascending, the carabiners locked together as the bottom ascender met up with the top.

It wasn’t a huge problem, but one that took some time to fix.  While we’ve run this setup before without having this problem, learn from our mistake, and only use locking carabiners.

Ascending Lessons Learned:

  • Ascenders don’t make good descenders, it’s better to rappel down a rope rather than try to descend using ascenders
  • “Easy Daisies and Easy Aiders” can be a tongue twister!
  • Use all locking carabiners

Here’s a quick video of the ascending equipment we’ve highlighted in this article

Stay tuned next week as we continue our “Learn How to Ascend” series with the ascending setup!

This information is provided solely as reference to supplement proper ascending training from an experienced guide, not replace it. Ascending is one of the most dangerous things you can do in climbing because you have to rely on your equipment and anchors 100%.

Did you get more than 14¢ of value today?

If so, we’d love to have you as a Crew Leader by joining our annual membership! Click the Learn More button below for details.

Thanks to the generosity of our supporting members and occasionally earning money from qualifying purchases as an Amazon Associate, (when you click our Amazon links) we’ve eliminated annoying ads and content.

At ITS, our goal is to foster a community dedicated to learning methods, ideas and knowledge that could save your life.

Discussion

Do you have what you need to prevail?

Shop the ITS Store for exclusive merchandise, equipment and hard to find tactical gear.

Do you have what you need to prevail? Tap the button below to see what you’re missing.