30 Second DIY Paperclip Lock Picks - ITS Tactical
Shop the ITS Store!

30 Second DIY Paperclip Lock Picks

By The ITS Crew

Using nothing more than two paperclips and a multi-tool, you can have a functioning set of lock picks in 30 seconds.

To begin, unfold your first paperclip and leave the natural U-shape at the top. Carefully use pliers to compress this shape so it’s thin, but still parallel. Next, place about 1/4 inch of the flattened end into your pliers and bend to about 90 degrees.

Now with your tension wrench created, it’s time to make your pick. Simply bend out one side of the paperclip and use your pliers to create the pick of your choice. Depending on your plier skills, you can make anything from a single hook to a more complicated rake. We’ve elected to go with just a simple hook.

With that done, you’re ready to get picking! When using these picks, it’s important to remember that the softer metal of paperclips means leverage is your enemy. You may need to play around with your hand position to find the right spot. Patience is key and once you find a good spot, you’ll have your lock open in no time.

Get your ITS Modular Lock in the ITS Store!

Did you get more than 14¢ of value today?

If so, we’d love to have you as a Crew Leader by joining our annual membership! Click the Learn More button below for details.

Thanks to the generosity of our supporting members and occasionally earning money from qualifying purchases as an Amazon Associate, (when you click our Amazon links) we’ve eliminated annoying ads and content.

At ITS, our goal is to foster a community dedicated to learning methods, ideas and knowledge that could save your life.


Do you have what you need to prevail?

Shop the ITS Store for exclusive merchandise, equipment and hard to find tactical gear.

Do you have what you need to prevail? Tap the button below to see what you’re missing.