ITS Hypalon Concealment Wallet: Discreetly Carry Entry and Escape Tools - ITS Tactical
 

ITS Hypalon Concealment Wallet: Discreetly Carry Entry and Escape Tools

By The ITS Crew

ITS Hypalon Concealment Wallet

The wait is over for the release of our ITS Hypalon Concealment Wallet! We’ve got a lot to announce today and are truly proud to release one of the most full featured wallets to ever hit the market.

ITS Hypalon Concealment Wallet

The ITS Hypalon Concealment Wallet represents an innovation in wallet design that combines advanced materials, cutting-edge construction techniques and unseen features. Hypalon is a synthetic rubber that’s resistant to chemicals, ultraviolet light and extreme temperatures, which makes the material perfect for a wallet. We’ve used advanced laser cutting techniques to prevent the typical edge fraying commonly associated with Hypalon and ensured it can take all the abuse you can throw at it. Hypalon’s “tackiness” helps prevent the wallet from falling out of your pocket, yet is easily removed. The material also keeps your individual credit cards from sliding out, which can often happen in leather card slots. These wallets were designed in collaboration with Zulu Nylon Gear and manufactured in the USA from 100% US made materials.

While the main feature of the wallet could arguably be its resilience and durability, we’ve added a special feature that includes two discreetly hidden compartments for physical security tools. Located on concealed fold-out flaps that blend in with the seam lines from the front wallet interior, each pocket is bisected by stitch lines which form the individual compartments for your tools. Now instead of carrying your security tools separately, you can keep these essential items together, hidden and available at a moments notice.

ITS Hypalon Concealment Wallet

ITS Hypalon Concealment Wallet

The contents of the optional Wallet Entry Kit are listed below and are our selection of the most versatile and critical tools you need at your disposal to gain entry to common pin and tumbler locks, padlocks, multi-wheel combination locks and additionally to escape from multiple methods criminals use for illegal restraint, such as commercially available handcuffs, zip ties, duct tape and rope. The two small vinyl pockets in the fold-out flaps are designed to hold the ceramic razor blade from the optional entry kit on one side and a microSD card on the other, which is not included.

ITS Hypalon Concealment Wallet

We’ve also designed another optional security device called the ITS RFID Wallet Sleeve, which is a radio frequency and electromagnetic interference device that disrupts the operation of any electronic device contained inside. It’s perfectly sized to fit in the same compartment as your bills and hold a few of your credit cards or ID cards that utilize RFID (radio frequency identification) to transfer data. Newer issued US Passport cards also feature these RFID tags.

RFID technology is essentially a microchip fitted with an antenna. By utilizing an RFID reader, a signal can be radioed to an RFID tag, returning the data it contains. This data is typically an identification number, credit card number, etc. As you can imagine, the signal can easily be skimmed by an RFID reader for nefarious purposes. Add on an RFID Wallet Sleeve and keep your critical cards secure.

ITS Hypalon Concealment Wallet

Wallet Features

  • Bi-Fold Design Holds 4 to 12+ cards
  • Rear Currency Pocket
  • Available in Black, Coyote Brown and Foliage
  • Chemical Resistant
  • UV / Weather Resistant
  • Abrasion Resistant
  • Empty Weight: 2.5 oz.
  • 100% US Made Hypalon Material
  • Made in the USA
  • **Please Note: Some materials, such as a new pair of blue jeans, may slightly discolor the lighter-colored ITS Hypalon Concealment Wallets.**

Optional Wallet Entry Kit Includes:

  • (1) Diamond Wire Blade
  • (1) Split-Pawl Handcuff Shim
  • (1) Quick Stick
  • (1) EZ Decoder
  • (1) Ceramic Razor Blade
  • (6) Feet of 188 lb. Test Kevlar Cordage
  • (6) Feet of Stainless-Steel Coated Leader Wire
  • (1) Flat Ti Bogota Entry Single Rake
  • (1) Flat Ti Bogota Entry Triple Rake
  • All items Made in the USA

Click here to pick up the new ITS Hypalon Concealment Wallet.

ITS RFID Wallet Sleeve

RFID Wallet Sleeve

RFID Wallet Sleeve

The ITS RFID Wallet Sleeve is a radio frequency and electromagnetic interference device that disrupts the operation of any electronic device contained inside. It was designed to fit inside of our ITS Hypalon Concealment Wallet, but can be used in any wallet the 3.75” x 2.75” pouch fits inside.

This small, lightweight and flexible pouch is made to attenuate and reflect signals from entering or leaving electronic devices. It was designed to hold a few of your credit cards or ID cards that utilize RFID (radio frequency identification) to transfer data. Newer issued US Passport cards also feature these RFID tags.

RFID technology is essentially a microchip fitted with an antenna. By utilizing an RFID reader, a signal can be radioed to an RFID tag, returning the data it contains. This data is typically an identification number, credit card number, etc. As you can imagine, the signal can easily be skimmed by an RFID reader for nefarious purposes.

Click here to pick up the new ITS RFID Wallet Sleeve.

Are you getting more than 14¢ of value per day from ITS?

Thanks to the generosity of our supporting members, we’ve eliminated annoying ads and obtrusive content. We want your experience here at ITS to be beneficial and enjoyable.

At ITS, our goal is to provide different methods, ideas and knowledge that could one day save your life. If you’re interested in supporting our mission and joining our growing community of supporters, click below to learn more.

Discussion

  • John

    Are there any plans to offer the Wallet Entry Kit as a standalone item?

    • @John definn12  At this time, the Wallet Entry Kit is only sold as an option for the Wallet. If you want some of the similar items, you could however look into the ITS Urban Kit [http://www.itstactical.com/store/edc/its-urban-kit/] and the Bogota Flat Ti 2-Piece [http://www.itstactical.com/store/security/bogota-entry-toolset/]. It’s a little more cost but you get a few extra items the Wallet Entry Kit doesn’t include.

  • garywpriest

    Ever consider making a wallet like this with a specifically designed space for a military challenge coin? You can stick them in any wallet but they tend to either damage your cards or the wallet itself over time. It also adds bulk. I bet ITS could come up with a more elegant solution.
    Padre

  • definn12

    Is it possible to purchase the wallet entry kit separately?

  • WesleyD

    I’m also very interested in purchasing the wallet entry kit separately. If it were just 2 hypalon sleeves each with 3 small pockets filled with the kit materials.

  • Kevlar129

    Congrats on selling out on the wallets with the wallet entry kit options! Hoping for a restock soon. I had considered just being the wallet for the time being, but there’s no sense in getting the wallet without having the tools it was designed for to equip it with, especially if the tool kit isn’t offered as a stand-alone item. 🙁

    • Kevlar129  WesleyD Hey Kevlar, while the Wallet Entry Kit option may be sold out at the moment, you could get the similar contents if you combine the ITS Urban Kit [http://www.itstactical.com/store/edc/its-urban-kit/] and the Bogota Flat Ti 2-Piece [http://www.itstactical.com/store/security/bogota-entry-toolset/]. It’s a little more cost but you get a few extra items the Wallet Entry Kit doesn’t include.

    • Kevlar129

      Thanks for the reply, Mike! I’ll consider your given option!

  • kt2

    Will the Wallet restock soon?

Do you have what you need to prevail?

Shop the ITS Store for exclusive merchandise, equipment and hard to find tactical gear.

Do you have what you need to prevail? Tap the button below to see what you’re missing.